CUSHOTHANE® XL™

  • Heaviest Load & Duty Cycle - from legendary American polyurethane technology and revolutionary XL3™ bonding technology.
  • Defies the Worst Surface Conditionsfrom the toughest polyurethane compound with the highest cut & tear resistance.
  • No Bond Separation Guaranteed* - Proprietary XL3™ bonding agent and special steel surface finishing creates a bond that resists heat and shear force.

 

Download the Cushothane® XL™ Rack Card

                                  Got Questions?

                              1.800.289.1456 x300

Load Wheels:

Cushothane® XL™ Load Wheels:

  • Higher Load Capacity Compound.
  • Highest Duty Cycle Tolerance.
  • XL3™ Bonding - No Bond Separation Guaranteed*.

 *See Warranty Tab

Primary OEM and Part #

Dimensions | Superior Item #

Clark® - 2831157

5 x 3.758 | L500377

Primary OEM and Part #

Dimensions | Superior Item #

Crown® - 77086

3.25 x 5 | L509135

Crown® - 100462

3.25 x 6.5 | L509141

Crown® - 83179

4 x 2.5 | L509143R

Crown® - 115032

5 x 2.875 | L509150

Crown® - 115033

5 x 4.125 | L509157

Primary OEM and Part #

Dimensions | Superior Item #

HYG® - 524148750

3.25 x 4.5 | L500163

HYG® - 524140951

3.25 x 6.5 | L500880R

HYG® - 580022365

4 x 2.875 | L500443

HYG® - 4133953

5 x 2.88 | L500878

Primary OEM and Part #

Dimensions | Superior Item #

Raymond® - L509433

3 x 3.5 | L509433

Raymond® - 632-069

3.25 x 5.937 | L500629

Raymond® - LI152681D

3.25 x 6.375 | L500528

Raymond® - 632-052

5 x 3.625 | L500654

Primary OEM and Part #

Dimensions | Superior Item #

UniCarriers® - 40310-fs001

3.25 x 5.984 | L500354

Extensive & Complete list of available sizes
• Load Wheels: 2” to 11“ O.D.

Assembly Options:

Dual and Triple Wheel Assemblies:

The optimal solution for pallet trucks that undergo frequent tight-turns typically found in single-direction style warehouse operations.  During cornering, the outside of a wheel tries to rotate faster to compensate for a larger turning radius. As a result, this can lead to one side of the load wheel to scuff and abraid quicker, leading to a common failure known as "coning". Splitting the longer width load wheel into 2 or 3 pieces not only solves the rotation differences, but also reduces heat build up to prevent bond separation.

Pre-Pressed Bearings, Spacers, and Axles:

All of our polyurethane load wheels can be purchased pre-assembled to include pressed in bearings, spacers & axles - drop in ready to save you time. We also offer the individual assembly components that can be pruchased separately. For more information on these components, visit our "Bearings & Fasteners" page.

No Bond Separation Guarantee Terms and Conditions:

These Terms and Conditions apply only to Cushothane® XL™ Load Wheel products and Cushothane® XL-AC™ Products ("Goods") sold under specific term "No Bond Separation Guaranteed" by Superior Tire & Rubber Corp. ("Seller"), except as otherwise specifically provided in a document signed by Seller. This sale and any sale resulting herefrom consists of only these terms and conditions and those in other documents referenced herein or attached hereto or in a document subsequently signed by Seller and referencing this transaction (all of which constitute the "Agreement").

1. Express Warranties.
     A. Seller warrants to Buyer only, that Goods (or portions thereof manufactured by Seller) shall be free from defects in materials and workmanship which are identified to Seller in writing within the one (1) year warranty period following the shipment of the Goods to Buyer, or within the usable work life of the goods, whichever comes first ("Warranty period"), and be free from bond failure until the end of usable work life of the Goods, subject to the disclaimers and limitations of the Agreement. Absence of such written claims during this Warranty period will constitute a waiver of all claims with respect to the Goods.
     B.Seller retains the right to change the dimensions, composition, design, performance, color and appearance of the Goods without liability if, in its judgment, the change is non material.
     C. Seller's warranties shall apply only if the Goods: (i) have been installed, maintained, and used in conformity with instructions and recommendations furnished by Seller from time to time, if any; (ii) have not been subjected to misuse, movement of the structure, physical abuse, installation error, negligence or accident; and, (iii) have not been altered or repaired by persons other than Seller in a manner, which, in the judgment of Seller, adversely affects the condition of the Goods. It is Buyer's responsibility to determine suitability of the Goods for Buyer's use and Buyer assumes all risk and liability associated therewith. 

 

2. Disclaimer and Limitation of Express Warranties.

There are no express warranties other than those contained in this Seller's Warranty Agreement. Whether or not the Goods are to be used exclusively by Buyer, there shall be no third party beneficiaries to the express warranties contained herein. Seller does not warrant that it or the Goods are in compliance with any entity, organization or industry standards, guidelines, or procedures unless specifically contained in the Agreement.

 
3. Remedy and Limitation of Seller's Liability.
     A.Defective or non-conforming Goods or parts thereof discovered during the Warranty period shall be repaired or replaced by Seller without any additional charge and shipped to Buyer, FOB Seller's plant, for reinstallation by Buyer at its cost, subject to the terms hereof. The warranty obligation of Seller is limited to the repair or replacement at Seller's plant of any part of the Goods which Buyer shall, within the Warranty period, return to Seller, with transportation charges prepaid by Buyer, and which Seller determines to be not in conformity with the express warranties contained herein. If Seller elects, Seller may, upon return of such Goods and making a determination of non conformity or defect, keep the Goods and refund the full or partial purchase price, based on the pro rata basis as a percentage of the remaining work life. Buyer's remedies shall be limited exclusively to those provided in this section. Buyer waives any causes of action or theories of liability including, but not limited to, those arising under contract, tort, strict liability, product liability, statutes, or otherwise, except as specifically provided by the Uniform Commercial Code ("UCC") as modified and limited here in. The replacement or repair of Goods by Seller does not give rise to any new warranty except the Warranty period provided for herein shall be extended by the length of any period from the date the defective or non conforming Goods are received by Seller until the date repaired or replacement Goods are delivered to Buyer.
     B.Buyer must contact Seller requesting warranty coverage plus a RMA form with a RMA number and other instructions for the return of Goods to Seller or other instructions. The Seller may, at sole discretion of the Seller, request evidence and/or information. Applicable credit will be issued toward existing account balance or future orders only, no cash refunds. Buyer must comply with Seller's return instructions (including return of the Goods) within sixty (60) days or the RMA form will be voided. Returned products have to arrive at the Seller's factory on later than thirty (30) days after Warranty period ends or the warranty coverage shell be voided. Buyer is responsible for properly tagging, identifying, and packing returned Goods. Goods returned without compliance with the above procedures shall be returned to the Buyer at Buyer's cost. Decision on the inspection results and all warranty treatment are final and decided at sole discretion of the seller.

  
4. Disclaimer of Implied Warranties.

SELLER DIS-CLAIMS ALL IMPLIED WARRANTIES (OTHER THAN GOOD TITLE) INCLUDING BUT NOT LIMITED TO THOSE OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, AND NON-INFRINGEMENT. Seller does not warrant the Goods will comply with the requirements of any safety or environmental code or regulation of any federal, state, municipality or other jurisdiction beyond the specific express warranties in this Agreement.

Site Proven, Customer Preferred

“I was experiencing repeat bond failures at one of my customers - a large food distribution center. I had tried many different products and found nothing would meet my customer’s work-life expectations. Superior Tire took the time to meet with my customer and identify a solution - the Cushothane® XL™ compound. Since using the Cushothane® XL™, my customer has been extremely happy. They no longer have to spend extra time and money on maintenance and new wheels from premature bond failures. They were so impressed with the work-life that I have now made this the “compound of choice” at other customer locations. With the Cushothane® XL™, I know that my customers are guaranteed to have no bond failures."

-Tommy Bush, Maintenance Supervisor - TruPar

View as Grid List

Items 1-12 of 150

Page
per page
Set Descending Direction
View as Grid List

Items 1-12 of 150

Page
per page
Set Descending Direction