BEARINGS AND AXLES

Superior Tire & Rubber Corp. offers competitively priced bearings within an extensive list of sizes. With this service, you will receive both wheels and bearings in one package from one purchase.

For more savings, we reduce your cost of labor by offering our bearing pressing service at just $0.25 per bearing.

Bearing Types

Bearings

• Contact Seal One Side
• Contact Seal Both Sides
• Shield One Side
• Shield Both Sides
• Contact Seal with Extended Inner Ring
• Contact Seal with Shield & Extended Inner Ring

Axles

No Information Available at the moment. Contact Superior Tire and Rubber for more information.

Other

No Information Available at the moment. Contact Superior Tire and Rubber for more information.

Bearing Information for Common Material Handling Tire and Wheel Applications

Single Row Radial Ball Bearing

Front

Back

Code

NSK – DDU

Timken – PP

SKF – 2RS

NTN – LLU

Main Function, Benefit, and Concern

• Non-Greaseable (NG)  

•Pre-packed grease contained within rubber seals

• Maintenance Free

• Rubber seals have full contact on both inner and outer race

• Rubber seals heat up and can melt down if used in high speed – leaking grease

• Rubber seals are sensitive to chemical attack – special rubber seals are required for some environments

• Grease cannot be refilled to replace deteriorated old grease

Where Used

• Fork, Outrigger and Stabilizing Caster Load Wheel

• Single direction of force (radial load) – limited thrust load capacity

• Low-Medium Speed and NonContinuous Run

• Clean facility, frequent washdown or wet conditions

Front

Back

Code

NSK – Z

Timken – D

SKF – Z

NTN – Z

Main Function, Benefit, and Concern

• Greaseable (G)

• Maintenance Required 

• Metal shield does not make sealed contact – no heat buildup in high speed run

• Shield does not completely prevent grease leakage but allows grease to effectively fill the bearing during maintenance

• Shield prevents debris from entering into the bearing

Where Used

• Fork, Outrigger and Stabilizing Caster Load Wheel

• Single direction of force (radial load) – limited thrust load capacity

• Long and continuous run

Front

Back

Code

NSK – DU

Timken – P

SKF – RS

NTN – LU

Main Function, Benefit, and Concern

• Greaseable (G) – for specific design only

• Requires extra hole in axle to release trapped air while greasing

• Almost maintenance free when used in low speed application

• Maintenance is required if used in high speed application due to leaking grease

• Rubber seals are sensitive to chemical attack – special rubber seals are required for some environments

Where Used

• Fork, Outrigger and Stabilizing Caster Load Wheel

• Single direction of force (radial load) – limited thrust load capacity

• Can be used in long and continuous ru

Front

Back

Code

 No Code

 

 

Main Function, Benefit, and Concern

• Greaseable (G) – for specific design only

• Requires extra hole in axle to release trapped air while greasing

• Almost maintenance free when used in low speed application

• Maintenance is required if used in high speed application due to leaking grease

• Rubber seals are sensitive to chemical attack – special rubber seals are required for some environments 

Where Used

• Fork, Outrigger and Stabilizing Caster Load Wheel

• Single direction of force (radial load) – limited thrust load capacity

• Can be used in long and continuous run

Front

Back

Code 

 No Typical Coding Pattern

 

 

Main Function, Benefit, and Concern

• Recommended only in Greaseable (one metal shield) configuration

• The inner lip/race acts as a spacer on the outside of the wheel eliminating extra components and offers a quicker and easier wheel change

• Same function as nonshouldered one shield ball bearing

Where Used

• Same usage as non-shouldered one shield ball bearing

• Faster wheel replacement

Single Row Cup and Cone

Code 

 No Typical Coding Pattern

 

 

Main Function, Benefit, and Concern

• Designed for multi-direction forces found mostly in 4th wheel casters (CL-II trucks) or drive tire

• Maintenance Required

• Require bearing cap to contain grease

• Require locking element (lock nut or snap ring) to prevent the cup from separating from cone

• Offers higher load capacity in the same size as ball bearing due to tapered roller elements which provides larger contact area

Where Used

• Able to accept multi-directional force (radial load and thrust load)

• CL-II Caster wheels or Drive tire

Loading External Forces

External Force

Type

Radial Loading

Is a force perpendicular to the axis of rotation (axle), such as weight (most Load wheels)

Thrust (Axial) Loading

A force parallel to the axis of rotation (axle), such as side impact or cornering

Angular Loading

A combination of both radial and thrust loading resulting in an angular force acting on the bearing  (most Drive tires and CL-II Caster wheels)

Assembly Options

Load Wheel

New Suffix

Description

A1

Greaseable bearing with 1-shield on the outside

New Suffix

Description

A1-V2

Greaseable bearing with 1-seal on the outside

New Suffix

Description

A2

Non-greaseable bearing with 2-seals on the inside and outside

New Suffix

Description

A2-V2

Non-greaseable bearing with 2-sheilds on the inside and outside

*If using a Shoulder bearing for any configuration "-SB" will be added to suffix

*If using a dual wheel, replace the "A" with a "D"

*if using a triple wheel, replace the "A" with a "T"

Load Wheel with Spacer and or Washer

New Suffix

Description

A3

Greaseable bearing with 1-shield on the outside & outside cap, spacer, shield and/or washer included

New Suffix

Description

A3-V2

Greaseable bearing with 1-seal on the outside & outside cap, spacer, shield and/or washer included

New Suffix

Description

A4

Non-greaseable bearing with 2-seals on the inside and outside & outside cap, spacer, shield and/or washer included

New Suffix

Description

A4-V2

Non-greaseable bearing with 2-sheilds on the inside and outside & outside cap, spacer, shield and/or washer included

*If using a Shoulder bearing for any configuration "-SB" will be added to suffix

*If using a dual wheel, replace the "A" with a "D"

*if using a triple wheel, replace the "A" with a "T"

Load Wheel with Spacer and or Washer, as well as Axle and Pin

New Suffix

Description

A5

Greaseable bearing with 1-shield on the outside & outside cap, spacer, shield and/or washer included & axle, zerk and pin included

New Suffix

Description

A5-V2

Greaseable bearing with 1-seal on the outside & outside cap, spacer, shield and/or washer included & axle, zerk and pin included

.

New Suffix

Description

A6

Non-greaseable bearing with 2-seals on the inside and outside & outside cap, spacer, shield and/or washer included &                                           axle and pin included

New Suffix

Description

A6-V2

Non-greaseable bearing with 2-sheilds on the inside and outside & outside cap, spacer, shield and/or washer included & axle and pin included

*If using a Shoulder bearing for any configuration "-SB" will be added to suffix

*If using a dual wheel, replace the "A" with a "D"

*if using a triple wheel, replace the "A" with a "T"

Options

Options depend on the make of the bearing. Please refer to the Availability tab for further information on options for bearings.

Site Prove, Customer Preferred

We can't find products matching the selection.