The Next Generation of Revolution

    • HeatSink™ Hub Design - rapidly cools the wheel, preventing material failure
    • 70% Lighter Than Traditional Solid Steel Load Wheels - reducing maintenance burden and shipping costs
    • Enhances the Lifetime - up to 2xs longer wheel work-life vs. traditional solid steel hub wheels
    • Reduces Wheel Binding- deters the build up of shrink wrap and other debris
    • No Bond Separation Guarantee*
    • Now Available in 5" & 6" ODs
    • Limited Availability in 4" OD

 

    Got Questions?

    1.800.289.1456 x300

    Superior Tire & Rubber Corp.’s team of engineers have developed a revolutionary load wheel design that will change the industry. The patent pending Velocity™ wheel significantly reduces weight, improves life of the compound, and increases carrying capacity. The Velocity™ wheel was created with the sole purpose of replacing the outdated traditional solid steel hub which was prone to heat build up and unnecessary weight - this not only saves us with manufacturing burden, it saves customers money through lower shipping charges and fewer replacement cycles.

    How does it hold up in long runs?

    How does it hold up to impact?

    Isn’t aluminum weaker than steel? Is it strong enough?

    What sizes are available?

    Can I buy these through my OEA program?

    How much do they cost compared to traditional?

    Where can I find cross reference information for OEM part numbers

    Is it covered under a warranty?

    Can I buy these without factory pressed bearings?

    How does it run cooler?

    What compounds are available for the Velocity™?

    HeatSink™ Technology:

    Using thermal imaging, the Velocity™ hub clearly shows a dissipation of heat through the vents and away from the bond and material. Max operating temperature is reduced by up to 10%, preventing it from reaching damaging temperatures and extending wear-life and bond strength.

    Cushothane® XL™ Compound for Load Wheels:

    • 97A Durometer.
    • Higher Load Capacity Compound.
    • Highest Duty Cycle Tolerance.
    • XL3™ Bonding - No Bond Separation Guaranteed*.

     *See Warranty Tab

    Primary OEM and Part #

    Dimensions | Superior Item #

    Crown® - 115032

    5 x 2.875 | V509150

    Crown® - 115033

    5 x 4.125 | V509157

    Primary OEM and Part #

    Dimensions | Superior Item #

    HYG® - 4133954

    5 x 3.87| V500458

    HYG® - 4133953

    5 x 2.88 | V500878

    Primary OEM and Part #

    Dimensions | Superior Item #

    Raymond® - 632-0525 x 3.625 | V500654
    Raymond® - 632-0465 x 2.875 | V500653

    Assembly Options:

    Velocity™ wheels are sold with bearings pre-pressed only. We offer 2 options to fit greaseable and non-greaseable setups.

    Greaseable

    Non-Greaseable

    New Suffix

    Description

    A1

    Greaseable bearing with 1-shield on the outside

    New Suffix

    Description

    A2

    Non-greaseable bearing with 2-seals on the outside and inside 

    No Bond Failure Guarantee Terms and Conditions:

    These Terms and Conditions apply only to Cushothane® XL™ Load Wheel products and Cushothane® XL-AC™ Products ("Goods") sold under specific term "No Bond Separation Guaranteed" by Superior Tire & Rubber Corp. ("Seller"), except as otherwise specifically provided in a document signed by Seller. This sale and any sale resulting herefrom consists of only these terms and conditions and those in other documents referenced herein or attached hereto or in a document subsequently signed by Seller and referencing this transaction (all of which constitute the "Agreement").

    1. Express Warranties.
         A. Seller warrants to Buyer only, that Goods (or portions thereof manufactured by Seller) shall be free from defects in materials and workmanship which are identified to Seller in writing within the one (1) year warranty period following the shipment of the Goods to Buyer, or within the usable work life of the goods, whichever comes first ("Warranty period"), and be free from bond separation until the end of usable work life of the Goods, subject to the disclaimers and limitations of the Agreement. Absence of such written claims during this Warranty period will constitute a waiver of all claims with respect to the Goods.
         B.Seller retains the right to change the dimensions, composition, design, performance, color and appearance of the Goods without liability if, in its judgment, the change is non material.
         C. Seller's warranties shall apply only if the Goods: (i) have been installed, maintained, and used in conformity with instructions and recommendations furnished by Seller from time to time, if any; (ii) have not been subjected to misuse, movement of the structure, physical abuse, installation error, negligence or accident; and, (iii) have not been altered or repaired by persons other than Seller in a manner, which, in the judgment of Seller, adversely affects the condition of the Goods. It is Buyer's responsibility to determine suitability of the Goods for Buyer's use and Buyer assumes all risk and liability associated therewith. 

     

    2. Disclaimer and Limitation of Express Warranties.

    There are no express warranties other than those contained in this Seller's Warranty Agreement. Whether or not the Goods are to be used exclusively by Buyer, there shall be no third party beneficiaries to the express warranties contained herein. Seller does not warrant that it or the Goods are in compliance with any entity, organization or industry standards, guidelines, or procedures unless specifically contained in the Agreement.

     
    3. Remedy and Limitation of Seller's Liability.
         A.Defective or non-conforming Goods or parts thereof discovered during the Warranty period shall be repaired or replaced by Seller without any additional charge and shipped to Buyer, FOB Seller's plant, for reinstallation by Buyer at its cost, subject to the terms hereof. The warranty obligation of Seller is limited to the repair or replacement at Seller's plant of any part of the Goods which Buyer shall, within the Warranty period, return to Seller, with transportation charges prepaid by Buyer, and which Seller determines to be not in conformity with the express warranties contained herein. If Seller elects, Seller may, upon return of such Goods and making a determination of non conformity or defect, keep the Goods and refund the full or partial purchase price, based on the pro rata basis as a percentage of the remaining work life. Buyer's remedies shall be limited exclusively to those provided in this section. Buyer waives any causes of action or theories of liability including, but not limited to, those arising under contract, tort, strict liability, product liability, statutes, or otherwise, except as specifically provided by the Uniform Commercial Code ("UCC") as modified and limited here in. The replacement or repair of Goods by Seller does not give rise to any new warranty except the Warranty period provided for herein shall be extended by the length of any period from the date the defective or non conforming Goods are received by Seller until the date repaired or replacement Goods are delivered to Buyer.
         B.Buyer must contact Seller requesting warranty coverage plus a RMA form with a RMA number and other instructions for the return of Goods to Seller or other instructions. The Seller may, at sole discretion of the Seller, request evidence and/or information. Applicable credit will be issued toward existing account balance or future orders only, no cash refunds. Buyer must comply with Seller's return instructions (including return of the Goods) within sixty (60) days or the RMA form will be voided. Returned products have to arrive at the Seller's factory on later than thirty (30) days after Warranty period ends or the warranty coverage shell be voided. Buyer is responsible for properly tagging, identifying, and packing returned Goods. Goods returned without compliance with the above procedures shall be returned to the Buyer at Buyer's cost. Decision on the inspection results and all warranty treatment are final and decided at sole discretion of the seller.

      
    4. Disclaimer of Implied Warranties.

    SELLER DIS-CLAIMS ALL IMPLIED WARRANTIES (OTHER THAN GOOD TITLE) INCLUDING BUT NOT LIMITED TO THOSE OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, AND NON-INFRINGEMENT. Seller does not warrant the Goods will comply with the requirements of any safety or environmental code or regulation of any federal, state, municipality or other jurisdiction beyond the specific express warranties in this Agreement.

    Site Proven, Customer Preferred

    “We run a 24/7 operation in a 900k sq ft facility and these Velocity™ wheels have more than doubled our worklife!"

    - Juan A., Sherwin Williams - Romeoville, IL

    “The Velocity wheels have been installed and running for over 7 months with absolutely no issues at all. They are being utilized in an aggressive, three-shift warehouse. Very impressive!"

    - Resident Technician - EV Logistics, Vancouver, CA

    “We ran the Velocity™ wheels on our Crown® standup reach trucks for three months.  They outperformed the wheels we were using by 80%.  They held up on different floor surfaces so much better and offered a smoother ride.  We were blowing out our previous load wheels dailty because of objects on the floor.  These really stood up!"

    - Greg Miller, Ahold - Assonet, MA

    View as Grid List

    8 Items

    per page
    Set Descending Direction
    View as Grid List

    8 Items

    per page
    Set Descending Direction