Testimonials - Cushotrac^® Track Pads

Ryan Wafer, Kiewit Pacific Co. in Portland, OR has been using Clamp On™ pads since they were introduced. "It makes one machine able to perform like two. Instead of having to buy an excavator with rubber tires, I can just put the Clamp On™ pads on my steel tracked machine for those jobs in residential areas and take them off when I'm back in the dirt."

John Herbert & Gary Poppelreiter from Colosimo Construction, an underground utility contractor near Pittsburgh, PA uses the Clamp On™ pads on their fleet of excavators. "We like the fact we can call, have pads shipped the next day and when they get here we can have them on the machine and get back to work in a couple hours." Gary goes on to say, "I've used the other guys pads over the years and these Clamp On™ pads are the real deal... they go on quickly and stay on! They last a long time and we don't have to stop during a job to see if they're still on there or tighten them up!."

Chicago Bridge & Iron Co. has outfitted their Mantis^®, Link Belt^® and Sennebogen^® cranes with the polyurethane Clamp On™ pads in 18" and 30"and 36" lengths. CB&I needed a track pad that could mount quickly and easily and stay on the 30, 50 and 70 ton machines under extreme loads while still protecting the surface of the large oil reserve tanks they were building. Josh King said, "The Clamp On™ pad was the perfect fit. We couldn't be more pleased."

Dewey Sheppard from CJ Hughes Construction Co. in Huntington, WV, has a set of Cushotrac^® Heavy Duty track pads from Superior on his JD 80 with over 3437 hours. "These tracks pads held up extremely well - off road as well as on. We will be installing them on all of our fleet"

Mike Hampton from Pavement Recycling Systems in Mira Loma, CA, has been using Cushotrac^® Polyurethane Bolt to Shoe milling pads since 2006. "As soon as the OEM pads wear out on a new machine, we switch to Superior's bolt to shoe system." The value is evident in their products and while they may not be the least expensive pads on the market today, they save us money in the long run." Mike goes on to say, "Superior really listens to the contractors... they offer the best poly pads out there and now they are offering a wire-impregnated bolt to shoe rubber pad for guys who want the additional traction... they have it all."

Superior has been manufacturing Cushotrac^® Heavy Duty track pads for machines with up to 40" steel grouser shoes since the late 1960's. Don Greeling from Hulcher Services, Denton, TX, has seen the Cushotrac^® Heavy Duty track pads on many machines over the years, including CAT^® 583 and 572, John Deere^® 850J and KOM D155 tractors and comments "We've tried other pads early on, but nothing has compared to Superior's pads for this type of application. I believe every contractor that does what we do uses Superior's pads and if there has ever been a problem, they fix it immediately."

Rick Clemens and John Danello from Turtle Southeast, Inc. in Largo, FL switched to the Cushotrac^® polyurethane Bolt to Shoe milling pads because "They proved to be the better product." "We don't just buy on price, we want products that won't fail, causing expensive down time and costly repairs. We tested the Cushotrac^® pads on a few different machines, side by side against our previous suppliers pads, and Superior's product proved to be the better product... period."

Tim Lamantia from Donegal Construction Co. in Greensburg, PA has been in the asphalt milling business for many years. "We tried them all, track pads that is, and while at times we've gone to the low cost alternative pads from other suppliers, we rely on the proven product of Superior's." Tim went on to say "They always have the product in stock so in an emergency there's no hassle... downtime is a killer in this business and Superior understands that."